Bluewater Logo 3D Emblem

Modernize your boat with the newest Bluewater Emblem

3M Polyethelene Tape backed

*Sold in Pairs

Application Techniques

Bond strength is dependent upon the amount of adhesive-to-surface contactdeveloped. Firm application pressure helps develop better adhesive contact andimprove bond strength.

To obtain optimum adhesion, the bonding surfaces must be clean, dry and wellunified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbingalcohol) or water.

Note: Be sure to follow the manufacturer s precautions and directions for use when using cleaning solvents. Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.